AC Infinity HYDRONE 7 Hands-On Review
Posted · 13:57 · Watch on YouTube
Unboxing and setting up the HYDRONE 7 in a real grow space. Setup, controls, first impressions, and how it fits into a tent environment. A solid look if you've been hunting a better way to manage humidity.
Chapters
Notes from the video
- AC Infinity rates it for tents up to 8x8, with 10 drying levels, dual 6 inch duct ports, and control through their UIS controllers. They say it can pull humidity as low as 25%.
- It can sit inside the tent, or run ducted as an open or closed loop. Ducting is not included.
- It is fairly big. In a 4x4 tent it takes up a good amount of floor space.
- Water goes into a tank of about half a gallon, or out through the drain hose. If your room runs wet, use the drain from the start.
- Programmed on port 6 with a humidity trigger: it turns on above 61% and runs until the tent is back under.
- Test with the exhaust fan off: at level 10 it took the tent from 90% humidity down to 60% in about 7 and a half minutes. Tent temperature rose from 60°F to 74°F while it ran.
- It does not need a controller. It has its own sensor probe and onboard controls, so it works on its own too.
10% Off Store-Wide
Get My CodeAffiliate link. 218 Cultivation may earn a commission at no extra cost to you. Details.
Go deeper
More AC Infinity videos
AC Infinity Controller AI+22:15
AC Infinity Controller 69 Pro Setup18:01
AC Infinity Propagation Tent Review8:11
AC Infinity Soil Sensor: Real-World Test9:48
How to Automate CO2 in Your Grow Tent11:32
Affiliate Partner · Real-World Testing
