Skip to content
218 Cultivation

AC Infinity Controller 69 Pro Setup

Posted · 18:01 · Watch on YouTube

Full setup walkthrough for the 69 Pro: programming schedules, sensor calibration, fan curves.

Chapters

  1. 0:00Intro
  2. 0:51Pairing over Bluetooth and Wi-Fi
  3. 2:13Naming the tent and ports
  4. 3:21Grow light settings
  5. 6:07Exhaust fan settings
  6. 9:39Circulating fan settings
  7. 12:00Dehumidifier on a UIS control plug
  8. 14:44Sunrise and sunset
  9. 16:32Transition buffers
  10. 17:21Wrap-up

Notes from the video

  • Grow light: set the off level to 0. Anything higher and the light stays on at that level when the schedule turns it off.
  • Grow light: the on level depends on your stage and how far the light hangs from the plants. Level 4 is used in the video. Run it in Schedule mode.
  • Exhaust fan: off level 0, on level 6, in Auto mode with triggers at 80°F and 60% humidity. It runs until the tent drops back under both.
  • Circulating fan: the same 80°F and 60% triggers, but an off level of 1 or 2 so the air in the tent never goes still.
  • Dehumidifier: runs through a UIS control plug, which only switches power on and off like a smart plug. Auto trigger at 65% humidity. Use one trigger at a time.
  • Sunrise and sunset: a 2 hour setting ramps the light up to its level over 2 hours, and down again before lights off.
  • Transition buffers of 1 or 2 degrees stop a device from switching on and off when the tent sits right at the trigger.

10% Off Store-Wide

Get My Code
Shop AC Infinity

Affiliate link. 218 Cultivation may earn a commission at no extra cost to you. Details.

More AC Infinity videos

All AC Infinity videos

Affiliate Partner · Real-World Testing